Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.

Amp/Speaker Cases - Carpet Series

Grundorf Carpet Series Amp/Speaker cases are all custom built to fit YOUR amp! No more lugging around a manufacturer's "stock" sized case that dwarf's your amp and takes up way too much room in your vehicle!

With a Grundorf case - you don't have to go home and "re-design" the interior of your case. Each case is fully lined with 1" high-density foam to provide a "glove" fit and fully protect your valuable gear. And the best news is with a Grundorf case, you save money! We don't charge extra for the custom fit!

The Grundorf Carpet Series Amp/Speaker cases are built tough! Each case has multi-layer plywood construction and is glued and stapled for maximum strength. The lid and body of the cases include a special bevel-cut design to "lock" the cases together providing a secure, dust-proof seal. The case is finished with a durable, easy care, carpet finish that will withstand years of wear-and-tear, and heavy duty, all steel hardware assuring this case will hold-up to years of road life!

You can leave your amp in the bottom tray during use, or set your amp on top of the closed case to get your amp at a height closer to ear level to help control the sound level on stage (and make your sound engineer very happy).

Grundorf Carpet Series Amp/Speaker Style Cases feature a lift-off lid design. Each case is custom built to fit each product! Each case comes standard with 1" high-density foam interior, heavy-duty ball corners and stacking ball corners, four recessed catches (two front and two back), and one recessed handle on each end.

Optional recessed key locks are available to secure your gear. You may add an optional 3" or 4" caster dolly plate (with or without brakes) to make transporting your gear even easier. Check out all the available options below! Carpet Series Amp/Speaker cases are available in Black Carpet Finish.

Available Finishes

Black Carpet

Available Options [±]

AS-LC

Large Caster (4") Dolly Plate

AS-LC2B

Large Caster (4") Two Brakes Dolly Plate

DISH

Caster Dish #37-019 Mounted on Case Top

HACH

Metal Cable Hatch with Open Access of H-4.7" x W-3.6"

IHEC

Internal Mount Pull-Out Handle #31-022 and Two Edge Mount Caster #37-008 Requires One Inside Dimension of Minimum 19.25"

LOC

Key-Locking Recessed Catch Replaces Medium Recessed Latch

RH

Extra Spring-Loaded Recessed Handle

TRAP

Trap Door for Cable Feed
Hinge on Top, Latch on Bottom
With Open Access H-6" x W-12"

Home | Literature Request | Contact Us | Legal

Grund Audio Design Home Page

Copyright © 1996-2016 Grundorf Corporation. All Rights Reserved