Black Laminate - Textured ABS Plastic Surface on Plywood. (Meets A.T.A. Specifications)
Gray Laminate - Textured ABS Plastic Surface on Plywood. (Meets A.T.A. Specifications)
Blue Laminate - Textured ABS Plastic Surface on Plywood. ( Meets A.T.A. Specifications )
Red Laminate - Textured ABS Plastic Surface on Plywood. (Meets A.T.A. Specifications)
Audio Visual Cases - Tour 4 Series
Grundorf's Tour 4™ Series Audio Visual cases are the perfect solution for storing all your non-rackmountable equipment, amps, players, guitar speaker stacks, etc. in a custom fit case. Each case is fully lined with 1" high-density foam to provide a "glove" fit and fully protect your valuable gear. And the best news is with a Grundorf case, you save money! We don't charge extra for the custom fit!
All Audio/Visual style cases are available as custom orders. You supply the dimensions (height, width, and depth) of the equipment, and we build around the gear.
Each Tour 4™ Series case is constructed with 1/4" multi layer plywood with a durable ABS laminate finish. The edges are finished with double edged aluminum extrusion. The lid-to-body seal is made with an interlocking aluminum tongue and groove valance system to provide a tight seal. The handles and catches all use a steel washer backed rivet system for greater durability.
The front and rear removable lids allow access to cables and controls so equipment can be left in the case during use. Dividers may be installed to create multiple compartments with different interior finishes (1" foam, black paint, rack rail, etc). Optional recessed key locks are available to secure your gear. Optional 3" or 4" caster dolly plates (with or without brakes) are also available. Choose from black, gray, blue or red finish colors.
Check out all the available options below!
Available Options [±]
Large Caster (4") Dolly Plate
Large Caster (4") Two Brakes Dolly Plate
Medium Caster (3") Dolly Plate
Medium Caster (3") Two Brakes Dolly Plate
Caster Dish #37-019 Mounted on Case Top
Wooden Drawer On Glides
External Pull-Out Handle #31-021 and Two Plastic Edge Mount Caster #37-021 Requires One Outside Dimension of Minimum 16"
Metal Cable Hatch with Open Access of H-4.7" x W-3.6"
2" Cable Hole with #39-002 Port
Internal Mount Pull-Out Handle #31-022 and Two Edge Mount Caster #37-008 Requires One Inside Dimension of Minimum 19.25"
Wooden Drawer On Glides with Foam Mic Insert
Extra Spring-Loaded Recessed Handle
Permanently Installed Shelf
Trap Door for Cable Feed
Wood Pull-out Tray on Glides