Black Laminate - Textured ABS Plastic Surface on Plywood. (Meets A.T.A. Specifications)
Red Laminate - Textured ABS Plastic Surface on Plywood. (Meets A.T.A. Specifications)
Gray Laminate - Textured ABS Plastic Surface on Plywood. (Meets A.T.A. Specifications)
Blue Laminate - Textured ABS Plastic Surface on Plywood. ( Meets A.T.A. Specifications )
Lighting Cases - Tour 8 Series
Grundorf Tour 8™ Series Light Cases are all custom built to fit YOUR gear! No more lugging around a manufacturer's "stock" sized case that dwarf's your gear and takes up way too much room in your vehicle! When you order a custom fit road case from Grundorf, you provide the dimensions - we provide the fit.
With a Grundorf Light Case - you don't have to go home and "re-design" the interior of your case. Each case interior s custom fit to your specifications. You also get a choice of interior finishes: black paint, carpet, or 1/2", 1", or 2" foam to provide a "glove" fit and fully protect your valuable gear. And the best news is with Grundorf road cases, you save money! We don't charge extra for the custom fit!
Grundorf Tour 8™ Series style Light Cases are built tough! Each case is constructed with 3/8" multi layer plywood with a durable ABS laminate finish. The edges are finished with double edged aluminum extrusion. The lid-to-body seal is made with an interlocking aluminum tongue and groove valance system to provide a tight seal. We use 12 rivet point recessed handles and 10 rivet point recessed catches to provide the strength needed for years of wear-and-tear. The handles and catches all use a steel washer backed rivet system for greater durability.
Choose from black, gray, blue, or red finish colors. Many more options are available on all Grundorf Lighting style cases including:
- LID STYLE - Choose a hinged lid or fully removable lid.
- INTERIOR FINISH - Choose a black painted interior, a soft black or gray carpet interior, or a foam lined interior. We offer 1/2", 1", or 2" thick foam. Choose from our softer, high-density foam, or the more firm shock foam. Foam interiors can be custom designed to securely protect your gear.
- KEY LOCKS - Add optional recessed key-locking catches to your case to secure your valuable gear!
- DIVIDERS - Front-to-back and left-to-right dividers are available to make separate compartments inside each lighting case to fit various sized pieces of equipment.
- REMOVABLE TRAY - We can install a removable tray that sits at the top section of the case over a separate compartment(s) below.
- CASTERS - Add a 3" or 4" caster dolly plate to your lighting case. Brakes are also available for the casters to keep your case steady. The casters are mounted to a plywood dolly plate which is then mounted to the case bottom.
Available Options [±]
Key-Locking Recessed Catch
Caster Dish #37-019 Mounted on Case Top
Internal Mount Pull-Out Handle #31-022 and Two Edge Mount Caster #37-008 Requires One Inside Dimension of Minimum 19.25"
Large Caster (4") Dolly Plate
Large Caster (4") Two Brakes Dolly Plate
Medium Caster (3") Dolly Plate
Medium Caster (3") Two Brakes Dolly Plate
Removable Wood Divider
Extra Spring-Loaded Recessed Handle
Removable Wood Tray