Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.

Pull-over Racks - Carpet Series

Grundorf's Tour 2™ Series Pull-Over Rack Cases will lessen the shock to your rack gear while in transit. The inner birch rack shell actually sits inside a foam lined outer case.

The Pull-Over style rack cases are really versatile. The inner rack shell can easily be removed and set on top of the outer case to get the rack gear at a table height. This style is also handy for those needing the rack gear in a studio during the week and out on a gig on the weekends.

The Grundorf Tour 2™ Series Pull-Over racks are built tough! Each flight case is constructed with 1/2" multi-layer plywood with a durable ABS laminate finish. The edges are finished with double edged aluminum extrusion. The lid-to-body seal is made with an interlocking aluminum tongue and groove valance system to provide a tight seal. We use 12 rivet point recessed handles and 10 rivet point recessed catches to provide the strength needed for years of wear-and-tear. The handles and catches all use a steel washer backed rivet system for greater durability.

Each road case includes a black spatter painted 24" birch rack shell with four cut out handles. The handles also serve as additional side ventilation. There is 23.5" of rackable depth. Rear rack rail is optionally available. The outer flight case is completely lined with 1" foam for shock absorption (2" foam lining is also available).

Optional recessed key locks are available to secure your gear. You may add an optional 3" or 4" caster dolly plate (with or without brakes) to make transporting your gear even easier. You also get to choose a finish color: black, gray, blue, or red.

Home | Literature Request | Contact Us | Legal

Grund Audio Design Home Page

Copyright © 1996-2018 Grundorf Corporation. All Rights Reserved