Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.

Mixer Cases - Carpet Series - Black Carpet Finish

Grundorf Carpet Series Mixer style cases are all custom built to fit YOUR gear! No more lugging around a manufacturer's "stock" sized case that dwarf's your gear and takes up way too much space in your vehicle!

With a Grundorf road case - you don't have to go home and re-design the interior of your case. Each case is lined with 1" thick foam to provide a "glove" fit and fully protect your valuable gear. And the best news is with a Grundorf road case, you save money! We don't charge extra for the custom fit!

Grundorf Carpet Series Mixer style cases are built tough! Each case has multi-layer plywood construction and is glued and stapled for maximum strength. The lid and body of the cases include a special bevel-cut design to "lock" the cases together providing a secure, dust-proof seal. The case is finished with a durable, easy care, carpet finish that will stand up to years of wear-and-tear, and heavy duty, all steel hardware assuring this case will withstand years of road life! Heavy duty recessed catches and handles are standard on each case.

Grundorf Carpet Series Mixer Style Cases feature a lift-off lid design. Each case comes standard with 1" foam interior, heavy-duty ball corners and stacking ball corners, recessed spring-loaded/rubber gripped handles, recessed catches, and heavy-duty black carpet finish.

Many options are available on all Grundorf Mixer style cases including:

  • MIXER TABLE - The Mixer Table option adds a "lip" under the bottom tray of the mixer case which stores a pair of wishbone table legs. This option requires minimum inside case dimensions of: W - 40" and D - 22".
  • COMPARTMENT - Add an additional storage compartment to the side or rear of any mixer case to store power supplys, cords, and other accessories. The compartments may have painted, carpeted or foam lined interior finishes.
  • KEY LOCKS - Add optional recessed key-locking catches to your case to secure your valuable equipment!
  • DOGHOUSE - The Grundorf Doghouse allows connectors and snake cables to be covered while the mixer is in use. The Doghouse is constructed of birch plywood and has a black spatter paint finish. This doghouse adds 8" cable clearance and 9" to the overall depth of the case. The height of the doghouse is the same as the mixer.
  • CASTERS - Add a 3" or 4" caster dolly plate to your mixer case. The casters are mounted to a plywood dolly plate which is then mounted to the top lid of the case. There is a minimum width required for dolly plates to prevent the wheels from "knocking". This minimum may require the caster dolly plate to be wider than the actual case.

⇑ Back to Top

 

Home | Literature Request | Contact Us | Legal

Grund Audio Design Home Page

Copyright © 1996-2024 Grundorf Corporation. All Rights Reserved