GP-10A™
Description[±]
The GP-10A is a very versatile loudspeaker perfect for self-contained systems requiring fast and inexpensive setups.
The reinforced, ribbed, two-piece mold design provides a non-flexing, low-resonant cabinet. The GP-10A may also be used as a floor monitor with mirror imaging capabilities. Also, each cabinet is equipped with a tension-adjustable stand mount design to eliminate leaning and for added strength when used on tripod stands or satellite poles. The GP-10A is well suited for stacking with top cups and bottom feet. Additionally, it is equipped with 4 fly points for permanent installation applications.
The GP-10A amplifier has external heat sink cooling fins. The main power supply uses a toroidal transformer to maintain high-quality tonality, stabilize bandwidth, and minimize the noise floor. An internal cooling fan is used to prevent air leakage that can cause detuning of the box, while also maintaining temperature control of the amplifier allowing it to run for hours of sustained use.
Voicing the microphone has never been easier. There is a mic and line level input allowing a mic to be plugged in direct, or for adding an external mixer or other audio device. When using the option of hooking up a mic line directly into the GP Series, the built-in sensitivity control and the 2-band equalizer allow flexibility and personal control of the critical frequencies for vocal optimization.
Check out the “less noise” knob! The GP-10A has a sensitivity knob to allow for the matching of the sensitivity levels on a variety of mixers. Additionally, the cabinet's XLR thru connections allow you to chain the boxes together while maintaining a full signal from each cabinet.
Application[±]
The GP-10A may be pole-mounted for use as a small, full-range, portable PA system or installed PA. A subwoofer may be added for additional low-end support. These speakers are equally adaptable as high-quality floor monitors.
These units are ideal for vocal and instrument reproduction, floor monitoring, or side-fills. The GP-10A is suitable for clubs, DJ's, live band, house of worship, corporate A/V, and educational facilities and anywhere a high-quality, self-contained portable PA is required.
Power up your Performance!
Specifications[±]
Power Handling : | |
(RMS): | 300 Watts |
(Program): | 600 Watts |
(Peak to Peak): | 1200 Watts |
Frequency Response: | 51 Hz - 20 kHz |
Sensitivity (1W @ 1M): | 97 dB SPL |
Power Configuration: | Bi-Amp |
Nominal Impedance: | 8 ohms |
Dispersion: | Horizontal 90° |
Vertical 60° | |
Components: | |
Low Frequency Driver | 10" Cone |
Components: | |
High Frequency Driver | 1" Compression Driver |
Connectors: | XLR In and Out |
Product Dimensions: | |
(inches) | H - 20.25" W - 14.19" D - 10.75" |
(millimeters) | H - 514.35 W - 360.43 D - 273.05 |
Product Weight: | 24.3 Lbs / 10.9 Kgs |
Shipping Dimensions: | |
(inches) | H -22.00" W -16.00" D -13.13" |
(millimeters) | H -558.80 W -406.40 D -333.50 |
Shipping Weight: | 30.0 Lbs / 13.5 Kgs |
Home | Literature Request | Contact Us | Legal
Grundorf Cases & Racks Home Page
Copyright © 1996-2024 Grundorf Corporation. All Rights Reserved