PRO-MC25C2C™

Protect your investment with a Grundorf Microphone Case!

This Grundorf Pro Series Mic Case offers superb protection for your microphones. The inside lid and bottom of the case are padded with 1" thick convoluted foam. The mics rest on a 2" thick foam block insert equipped with 1.13" holes accommodating up to 25 microphones. The foam mic insert is completely removable exposing a storage area in the bottom of the case. The storage area under the microphone insert measures H—7.0" W—14.44" D—12.0".

Removable dividers so you can customize this case to fit your gear!

This Pro Series mic case not only accommodates up to 25 mics, it has removable dividers that can accommodate one, two or three individual compartments. The two compartments next to the microphone section each measure H—9.5" W—6.75" D—13.13" inside. If the divider is removed, these two compartments become one compartment measuring H—9.5" W—14.38" D—13.13" inside. With both dividers and mic foam insert removed, the one large compartment measures H—9.5" W—29.63" D—12.0" left side and 13.13" right side. With one center divider, the inside dimensions of the two compartments are H—9.5" W—14.5" D—12.0" left side and 13.13" right side. Additionally, there is 1.25" height in the lid of the case not included in the above dimensions.

The PRO-MC25 offers a sturdy, vinyl laminate covered, plywood construction. The edges are finished with double edged aluminum extrusion. The lid-to-body seal is made with an interlocking aluminum tongue and groove valance system to provide a tight seal. This case is equipped with one recessed handle on the front and one on each end. There are two pad-lockable recessed latches on the front.

Don't forget to check out this great feature - two edge mount casters on one end to make transporting this case a breeze!

You can store cables, clips, wireless transmitters, batteries, and other accessories in this case. Pro Series cases are available in a classic Black finish.