Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.

Projector Cases - Tour 8 Series

Grundorf Tour 8™ Series Projector cases are all custom built to fit YOUR equipment! No more lugging around a manufacturer's "stock" sized case that dwarf's your gear and takes up way too much room in your vehicle!

With a Grundorf road case you can be sure your equipment will fit in the case. You don't have to go home and "re-design" the interior of your case. Each case is fully lined with 1" thick high-density foam to provide a "glove" fit and fully protect your valuable equipment. And the best news is with a Grundorf case, you save money! We don't charge extra for the custom fit!

Grundorf Tour 8™ Series Projector Cases feature a hinged lid design or you may request a removable lid. Each case comes standard with 1" high-density foam interior, heavy-duty metal corners, aluminum extrusion and 3/8" multi-layer plywood with ABS laminate exterior. The edges are finished with double edged aluminum extrusion. The lid-to-body seal is made with an interlocking aluminum tongue and groove valance system to provide a tight seal. We use 12 rivet point recessed handles and 10 rivet point recessed catches to provide the strength needed for years of wear-and-tear. The handles and catches all use a steel washer backed rivet system for greater durability.

Optional recessed key locks are available to secure your equipment. Optional compartments may also be added to store cords, cables, spare parts, and other accessories. On Tour 8™ Series Projector cases you may add optional pull-out handle/wheels on one end to make transporting your equipment even easier. You also get to choose a finish color: black, gray, blue, or red.

Available Finishes

Black Laminate - Textured ABS Plastic Surface on Plywood. (Meets A.T.A. Specifications)

Gray Laminate - Textured ABS Plastic Surface on Plywood. (Meets A.T.A. Specifications)

Blue Laminate - Textured ABS Plastic Surface on Plywood. ( Meets A.T.A. Specifications )

Red Laminate - Textured ABS Plastic Surface on Plywood. (Meets A.T.A. Specifications)

Available Options [±]

8-LOC

Key-Locking Recessed Catch Replaces Medium Recessed Latch

IHCC

Internal Mount Pull-Out Handle #31-022 and Two Corner Mount Caster #37-029 Requires One Inside Dimension of Minimum 19.25"

IHEC

Internal Mount Pull-Out Handle #31-022 and Two Edge Mount Caster #37-008 Requires One Inside Dimension of Minimum 19.25"

Home | Literature Request | Contact Us | Legal

Grund Audio Design Home Page

Copyright © 1996-2017 Grundorf Corporation. All Rights Reserved